View IRHNJ63130_732682.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PD-95816A
RADIATION HARDENED POWER MOSFET SURFACE-MOUNT (SMD-0.5)
Product Summary
Part Number Radiation Level IRHNJ67130 100K Rads (Si) IRHNJ63130 300K Rads (Si) RDS(on) 0.042 0.042 ID 22A* 22A*
IRHNJ67130 100V, N-CHANNEL
TECHNOLOGY
SMD-0.5
International Rectifier's R6TM technology provides superior power MOSFETs for space applications. These devices have improved immunity to Single Event Effect (SEE) and have been characterized for useful performance with Linear Energy Transfer (LET) up to 90MeV/(mg/cm2). Their combination of very low RDS(on) and faster switching times reduces power loss and increases power density in today's high speed switching applications such as DC-DC converters and motor controllers. These devices retain all of the well established advantages of MOSFETs such as voltage control, ease of paralleling and temperature stability of electrical parameters.
Features:
n n n n n n n n n n
Low RDS(on) Fast Switching Single Event Effect (SEE) Hardened Low Total Gate Charge Simple Drive Requirements Ease of Paralleling Hermetically Sealed Surface Mount Ceramic Package Light Weight
Absolute Maximum Ratings
Parameter
ID @ VGS = 12V, TC = 25C ID @ VGS = 12V, TC = 100C IDM PD @ TC = 25C VGS EAS IAR EAR dv/dt TJ T STG Continuous Drain Current Continuous Drain Current Pulsed Drain Current A Max. Power Dissipation Linear Derating Factor Gate-to-Source Voltage Single Pulse Avalanche Energy A Avalanche Current A Repetitive Avalanche Energy A Peak Diode Recovery dv/dt A Operating Junction Storage Temperature Range Pckg. Mounting Surface Temp. Weight * Current is limited by package For footnotes refer to the last page 22* 19 88 75 0.6 20 73 22 7.5 3.8 -55 to 150 300 (for 5s) 1.0 (Typical)
Pre-Irradiation
Units A
W
W/C
V mJ A mJ V/ns
o
C
g
www.irf.com
1
02/18/05
IRHNJ67130
Pre-Irradiation
Electrical Characteristics @ Tj = 25C (Unless Otherwise Specified)
Parameter
BVDSS Drain-to-Source Breakdown Voltage BV DSS /T J Temperature Coefficient of Breakdown Voltage RDS(on) Static Drain-to-Source On-State Resistance VGS(th) Gate Threshold Voltage g fs Forward Transconductance IDSS Zero Gate Voltage Drain Current
Min
100 -- -- 2.0 14 -- -- -- -- -- -- -- -- -- -- -- --
Typ Max Units
-- 0.11 -- -- -- -- -- -- -- -- -- -- -- -- -- -- 4.0 -- -- 0.042 4.0 -- 10 25 100 -100 35 13 14 20 38 35 15 -- V V/C V S( ) A
Test Conditions
VGS = 0V, ID = 1.0mA Reference to 25C, ID = 1.0mA VGS = 12V, ID = 19A A VDS = VGS, ID = 1.0mA VDS = 15V, IDS = 19A A VDS = 80V ,VGS=0V VDS = 80V, VGS = 0V, TJ = 125C VGS = 20V VGS = -20V VGS = 12V, ID = 22A VDS = 50V VDD = 50V, ID = 22A, VGS = 12V, RG = 7.5
IGSS IGSS Qg Q gs Q gd td(on) tr td(off) tf LS + LD
Gate-to-Source Leakage Forward Gate-to-Source Leakage Reverse Total Gate Charge Gate-to-Source Charge Gate-to-Drain (`Miller') Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Total Inductance
nA nC
ns
nH
Measured from the center of drain pad to center of source pad VGS = 0V, VDS = 25V f = 1.0MHz f = 1.0MHz, open drain
Ciss C oss C rss Rg
Input Capacitance Output Capacitance Reverse Transfer Capacitance Internal Gate Resistance
-- -- -- --
1730 340 6.0 1.03
-- -- -- --
pF
Source-Drain Diode Ratings and Characteristics
Parameter
IS ISM VSD trr Q RR ton Continuous Source Current (Body Diode) Pulse Source Current (Body Diode) A Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Forward Turn-On Time
Min Typ Max Units
-- -- -- -- -- -- -- -- -- -- 22* 88 1.2 355 3.0
Test Conditions
A
V ns C Tj = 25C, IS = 22A, VGS = 0V A Tj = 25C, IF = 22A, di/dt 100A/s VDD 25V A
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
* Current is limited by package
Thermal Resistance
Parameter
RthJC Junction-to-Case
Min Typ Max Units
-- -- 1.67
C/W
Test Conditions
Note: Corresponding Spice and Saber models are available on International Rectifier Web site. For footnotes refer to the last page
2
www.irf.com
Radiation Characteristics Pre-Irradiation
IRHNJ67130
International Rectifier Radiation Hardened MOSFETs are tested to verify their radiation hardness capability. The hardness assurance program at International Rectifier is comprised of two radiation environments. Every manufacturing lot is tested for total ionizing dose (per notes 5 and 6) using the TO-3 package. Both pre- and post-irradiation performance are tested and specified using the same drive circuitry and test conditions in order to provide a direct comparison.
Table 1. Electrical Characteristics @ Tj = 25C, Post Total Dose Irradiation AA
Parameter
BVDSS VGS(th) IGSS IGSS IDSS RDS(on) RDS(on) VSD Drain-to-Source Breakdown Voltage Gate Threshold Voltage Gate-to-Source Leakage Forward Gate-to-Source Leakage Reverse Zero Gate Voltage Drain Current Static Drain-to-Source On-State Resistance (TO-3) Static Drain-to-Sourcee On-State Resistance (SMD-0.5) Diode Forward Voltage Up to 300K Rads (Si)1
Min
100 2.0 -- -- -- -- -- --
Max
Units
V nA A V
Test Conditions
VGS = 0V, ID = 1.0mA VGS = VDS, ID = 1.0mA VGS = 20V VGS = -20V VDS= 120V, VGS= 0V VGS = 12V, ID = 12A VGS = 12V, ID = 12A VGS = 0V, ID = 19A
-- 4.0 100 -100 10 0.045 0.042 1.2
1. Part numbers IRHNJ67130, IRHNJ63130
International Rectifier radiation hardened MOSFETs have been characterized in heavy ion environment for Single Event Effects (SEE). Single Event Effects characterization is illustrated in Fig. a and Table 2.
Table 2. Single Event Effect Safe Operating Area
Ion LET
(MeV/(mg/cm2)) Br I Au 37.46 59.72 81.44
Energy
(MeV) 278.5 320 333
Range
(m) 36.03 30.97 27.53
@VGS= @VGS= @VGS=
VDS (V)
@VGS= @VGS= @VGS= @VGS=
0V 100 100 100
-5V 100 100 100
-10V 100 100 -
-15V 100 30 -
-17V 100 -
-19V 100 -
-20V 40 -
120 100 80 60 40 20 0 0 -5 -10 VGS -15 -20
Br I Au
Fig a. Single Event Effect, Safe Operating Area
For footnotes refer to the last page
www.irf.com
VDS
3
IRHNJ67130
Pre-Irradiation
100
ID, Drain-to-Source Current (A)
10
1
ID, Drain-to-Source Current (A)
VGS TOP 15V 12V 10V 8.0V 7.0V 6.0V 5.0V BOTTOM 4.5V
100
VGS 15V 12V 10V 8.0V 7.0V 6.0V 5.0V BOTTOM 4.5V TOP
10
0.1
4.5V 60s PULSE WIDTH Tj = 25C 0.1 1 10 100 1000
4.5V 1 0.1 1
0.01
60s PULSE WIDTH Tj = 150C 10 100 1000.0
VDS , Drain-to-Source Voltage (V)
VDS , Drain-to-Source Voltage (V)
Fig 1. Typical Output Characteristics
Fig 2. Typical Output Characteristics
100 T J = 150C 10 T J = 25C
2.5
RDS(on) , Drain-to-Source On Resistance (Normalized)
ID = 22A
ID, Drain-to-Source Current (A)
2.0
1.5
1.0
1
0.5
0.1 4 5 6
VDS = 50V 15 60s PULSE WIDTH 7 8 9 10
0.0 -60 -40 -20
VGS = 12V
0 20 40 60 80 100 120 140 160
VGS, Gate-to-Source Voltage (V)
TJ , Junction Temperature ( C)
Fig 3. Typical Transfer Characteristics
Fig 4. Normalized On-Resistance Vs. Temperature
4
www.irf.com
Pre-Irradiation
IRHNJ67130
2800 2400
VGS , Gate-to-Source Voltage (V)
VGS = 0V, f = 1MHz Ciss = Cgs + Cgd , Cds SHORTED Crss = Cgd Coss = Cds + Cgd
20 ID = 22A 16 VDS = 80V VDS = 50V VDS = 20V
C, Capacitance (pF)
2000 1600 1200 800 400 0
Ciss
12
Coss
8
4 FOR TEST CIRCUIT SEE FIGURE 13 0 0 5 10 15 20 25 30 35 40 Q G, Total Gate Charge (nC)
Crss
1 10 100
VDS , Drain-to-Source Voltage (V)
Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage
Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage
100 T J = 150C
T J = 25C
1000 OPERATION IN THIS AREA LIMITED BY R DS(on)
ISD , Reverse Drain Current (A)
ID, Drain-to-Source Current (A)
100
10
10
100s 1ms
1 Tc = 25C Tj = 150C Single Pulse 1.0 10 100
10ms
1 0.4 0.6 0.8 1.0
VGS = 0V 1.2 1.4
0.1
1000
VSD , Source-to-Drain Voltage (V)
VDS , Drain-toSource Voltage (V)
Fig 7. Typical Source-Drain Diode Forward Voltage
Fig 8. Maximum Safe Operating Area
www.irf.com
5
IRHNJ67130
Pre-Irradiation
30
LIMITED BY PACKAGE
25
VDS VGS RG
RD
D.U.T.
+
ID , Drain Current (A)
20
-V DD
VGS
15
Pulse Width 1 s Duty Factor 0.1 %
10
Fig 10a. Switching Time Test Circuit
VDS 90%
5
0
25
50
TC , Case Temperature ( C)
75
100
125
150
Fig 9. Maximum Drain Current Vs. Case Temperature
10% VGS
td(on) tr t d(off) tf
Fig 10b. Switching Time Waveforms
10
Thermal Response (Z thJC )
1 D = 0.50 0.20 0.10 0.1 0.05 0.02 0.01 SINGLE PULSE (THERMAL RESPONSE) PDM t1 t2 Notes: 1. Duty factor D = t 1 / t 2 2. Peak T J = P DM x Z thJC + TC 0.0001 0.001 0.01 0.1 1
0.01 0.00001
t1 , Rectangular Pulse Duration (sec)
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case
6
www.irf.com
Pre-Irradiation
IRHNJ67130
120
EAS , Single Pulse Avalanche Energy (mJ)
TOP
100
15V
BOTTOM
ID 10A 14A 22A
VDS
L
DRIVER
80
RG
D.U.T.
IAS tp
+ - VDD
60
A
VGS 20V
40
0.01
Fig 12a. Unclamped Inductive Test Circuit
20
0
25
V(BR)DSS tp
Starting TJ , Junction Temperature ( C)
50
75
100
125
150
Fig 12c. Maximum Avalanche Energy Vs. Drain Current
I AS
Fig 12b. Unclamped Inductive Waveforms
Current Regulator Same Type as D.U.T.
50K
QG
12V
.2F .3F
12 V
QGS
QGD
VGS
3mA
D.U.T.
+ V - DS
VG
Charge
IG
ID
Current Sampling Resistors
Fig 13a. Basic Gate Charge Waveform
Fig 13b. Gate Charge Test Circuit
www.irf.com
7
IRHNJ67130
Pre-Irradiation
Footnotes:
A Repetitive Rating; Pulse width limited by
maximum junction temperature. A VDD = 25V, starting TJ = 25C, L= 0.3 mH Peak IL = 22A, VGS = 12V A ISD 22A, di/dt 420A/s, VDD 100V, TJ 150C
A Pulse width 300 s; Duty Cycle 2% A Total Dose Irradiation with VGS Bias.
12 volt VGS applied and V DS = 0 during irradiation per MIL-STD-750, method 1019, condition A. A Total Dose Irradiation with VDS Bias. 80 volt VDS applied and V GS = 0 during irradiation per MlL-STD-750, method 1019, condition A.
Case Outline and Dimensions -- SMD-0.5
PAD ASSIGNMENTS 1 = DRAIN 2 = GATE 3 = SOURCE
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 IR LEOMINSTER : 205 Crawford St., Leominster, Massachusetts 01453, USA Tel: (978) 534-5776 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. Data and specifications subject to change without notice. 02/2005
8
www.irf.com

▲Up To Search▲

Price & Availability of IRHNJ63130

	To Download IRHNJ63130 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .